Renewable Design for AU41 outriger shelving to Yemen Importers

Suzhou Innovative Store Equipment Co., Ltd – Manufacturing of shelf systems for shop fittings ( shop shelving, retail shelving, display shelving, storage shelving, warehouse shelving ) was started in the 1989’s. Because of improvement in products quality and achievement of compatibility with another used shelf systems, production strongly expanded both in total output and quantity of manufactured components parts.

We are willing to offer you a solution for any problem in the area of shopfitting. We can offer both our standard products and products meeting your specific requirements.

Everything will be delivered in perfect shape and high quality.

Standard components

• AU50 Outrigger shelving with heavy duty capacity to hold bottled heavy commodities
• Heavy duty slotted upright frames and base supports make ‘H’ shelving unit stable
• Chrome shelves with wire grid
• Attractive surface finish
• Back panel made of 0.8mm steel panel with standard 1” centered holes
• Back panel made of 1.0mm steel panel with standard 1” centered volcano holes
• Back panel made of 0.6mm steel flat panel
• Back panel made of wire panel with 25*50mm grid

Advantage

• Easy set up with no tools required
• Designed to conserve warehouse space
• Industry’s most competitively priced units
• Designed to get attention and give maximum display space

More option

Use our optional parts and accessories to create a unique point-of-purchase units.

Peg hooks | Light box | Side frame | Side mirror panel | Spreader bar

What we can offer:

• System solution for any kind of shop centers
• High flexibility
• Simplicity and favourable price
• High quality
• Development and design according to requirements of clients

This video is for information only!

The stool on one of my windows had cracked due to a heavy a/c unit being placed on it over the years, so I decided rather than repair it I would replace it. This video shows you how I went about doing that. Although I had done nothing like this before, I found that this was not a difficult job to do. I was fortunate that I was able to get the old stool out in one piece and as such I used this as a template for the new stool. I also set up my table saw by placing the old stool on it and setting the blade depth and angle of cut accordingly. I would highly recommend making test cuts on some scrap pieces of wood before committing to sawing the new piece.

The new wood for the stool cost me $10 from a local lumber yard; the piece for the apron about $4 from Home Depot. I also used 8d finishing nails.

TWITTER: https://www.twitter.com/myoldreteacher