China Manufacturer for Overhead garage shelving for Canberra Factories

Suzhou Innovative Store Equipment Co., Ltd. – the supplier of storage shelving systems of the highest standard. The storage shelving provide is with speed and ease of assembly.

Whether for workshops, at home, in offices or garages, applications for the wall rails and shelves are almost unlimited. This means that almost all desired shelf arrangements can be achieved that are not only highly practical but also have a pleasing appearance.

Standard components

• Overhead shelving is save space of garage
• The celling and safety shelving is an excellent way of maximizing wall space in your garage
• Wire grid shelves and wave steel shelves are make shelving heavy duty

Advantage

• Designed to conserve warehouse and display space
• Industry’s most competitively priced units
• Designed to get attention and give maximum display space

More option

Use our optional parts and accessories to create a unique point-of-purchase units.

T post | Side panel | MDF hole back | Side wire mesh panel | Spreader bar | Front door

What we can offer:

• System solution for any kind of storage and warehouse
• High flexibility
• Simplicity and favourable price
• High quality
• Development and design according to requirements of clients

Entrepreneur Dan Germain visits Google’s London campus to discuss the book “A Book about Innocent: Our Story.” This event took place on May 14, 2009

Enjoy your patio all summer long by adding an Americana Teton Patio Cover. Patio covers from American are easy to install, especially with the help of this instructional video from Lowe’s.

Before you begin, measure the area to be covered. Then cut your post to measurement. Remember to allow for a slope. Drill holes on the awning rail. Check the instruction manual for dimensions. Slide the mounting channel into the awning rail.

Step 1 — Mounting the Awning Rail

Attach the awning rail to the structure. See the manual for the type of screws needed. Apply silicone to the back side of the entire rail.

Step 2 — Attaching the Two Roof Panels

Attach the panel on each side to the awning rail. Check the manual for screw type. Don’t tighten the screws yet. Slide in the Styrofoam flashing plug to prevent water leaks.

Step 3 — Attaching the Header Beam to the Posts

Attach the post brackets to the beam. Check the manual for spacing recommendations. Slide the posts in place and attach them to the bracket on both sides using screws. Do the same for the other side.

Step 4 — Attaching the Beam and Posts to the Roof Panel

Stand the beam and posts upright with the roof panels sitting lightly on them. You can do this one at a time if it is easier for you. Set your measurements for the placement of the beam. Check the manual for recommendations. Attach the roof panel to the beam. Make sure the posts are level. Mark the position. Place the bracket in position and mark the holes for drilling. Drill all four holes. Place the bracket back in position. Place the concrete anchors in the holes.

Be sure to watch the second part of this instructional video for the final steps of assembling your patio cover. Shop patio covers at Lowe’s: https://www.Lowes.com

Subscribe to Lowe’s YouTube for great how to videos and home improvement tips: https://www.youtube.com/subscription_center?add_user=lowes

Or head to our channel: https://www.youtube.com/Lowes