Best Price on Steel panel shelving for Melbourne Manufacturer

Suzhou Innovative Store Equipment Co., Ltd. – the supplier of industrial warehouse shelving systems of the highest standard. Industrial shelving calls for high standards of stability and load bearing capacity and the optimum degree of safety. The warehouse racking provide is with speed and ease of assembly. The components parts can be straightforwardly assembled and are distinguished by the precision detailing of their cross members (with varying load bearing capacities) stretchers and shelves.

Safety is a major feature of our industrial shelving systems. Indispensable safety accessories include end-brackets, back stops and collision guards. Environmental protection is closely associated with safety. Our powder coating contain no solvents, while the process materials we use are free of any aromatic or chlorinated hydrocarbons.

Standard components

• Workbench make the garage neat & clean
• From DIY to shelving solution at garage, office or warehousing
• Workbench with perforated back panel will get you the product and service you are looking for faster and easier

Advantage

• Designed to conserve warehouse and display space
• Industry’s most competitively priced units
• Designed to get attention and give maximum display space

More option

Use our optional parts and accessories to create a unique point-of-purchase units.

Perforated back panel | Drawers | Peg hooks | Plastic box | Top light box

What we can offer:

• System solution for any kind of storage and warehouse
• High flexibility
• Simplicity and favourable price
• High quality
• Development and design according to requirements of clients

Enjoy your patio all summer long by adding an Americana Teton Patio Cover. Patio covers from American are easy to install, especially with the help of this instructional video from Lowe’s.

Before you begin, measure the area to be covered. Then cut your post to measurement. Remember to allow for a slope. Drill holes on the awning rail. Check the instruction manual for dimensions. Slide the mounting channel into the awning rail.

Step 1 — Mounting the Awning Rail

Attach the awning rail to the structure. See the manual for the type of screws needed. Apply silicone to the back side of the entire rail.

Step 2 — Attaching the Two Roof Panels

Attach the panel on each side to the awning rail. Check the manual for screw type. Don’t tighten the screws yet. Slide in the Styrofoam flashing plug to prevent water leaks.

Step 3 — Attaching the Header Beam to the Posts

Attach the post brackets to the beam. Check the manual for spacing recommendations. Slide the posts in place and attach them to the bracket on both sides using screws. Do the same for the other side.

Step 4 — Attaching the Beam and Posts to the Roof Panel

Stand the beam and posts upright with the roof panels sitting lightly on them. You can do this one at a time if it is easier for you. Set your measurements for the placement of the beam. Check the manual for recommendations. Attach the roof panel to the beam. Make sure the posts are level. Mark the position. Place the bracket in position and mark the holes for drilling. Drill all four holes. Place the bracket back in position. Place the concrete anchors in the holes.

Be sure to watch the second part of this instructional video for the final steps of assembling your patio cover. Shop patio covers at Lowe’s: https://www.Lowes.com

Subscribe to Lowe’s YouTube for great how to videos and home improvement tips: https://www.youtube.com/subscription_center?add_user=lowes

Or head to our channel: https://www.youtube.com/Lowes